Treadsteps are made from a rubber composite designed to offer a hard-wearing and highly slip-resistant finish for stairs. Often used externally in such locations as car parks, the steps outside public buildings and historic sites. Treadsteps can be used as a complete stair covering or as a stair nosing. There are two ways of fitting Treadsteps:

1. Cast into step: Set into each step of a staircase when the staircase is being cast, usually in terrazzo or concrete. When the staircase is ‘set’ and out of the mould the tread surface should be level with the step, as not to course a trip hazard.
2. Rebate into step: A channel is routed out of the step, usually in a timber staircase, however, possible with terrazzo or concrete. The Treadstep strip is inserted and adhered with a proprietary epoxy adhesive. Check with adhesive manufacturers for the recommended adhesive – Treadsteps are rubber based.

The above two ways of fitting applies to all four types of Treadstep that Quantum Flooring Accessories have available.

The Treadsteps that are available are all listed below can be viewed on the following web page https://quantumprofilesystems.com/quantum-flooring-accessories/stair-nosings/treadsteps/

For more information tailored to your specific project needs, reach out today! Call us at 0161 627 4222 or email [email protected]. Explore our useful links below:

1. Product Selector https://quantumprofilesystems.com/quantum-flooring-accessories/easy-product-search/
2. 24-hour samples https://quantumprofilesystems.com/quantum-flooring-accessories/request-sample/
3. NBS Specification https://quantumprofilesystems.com/quantum-flooring-accessories/nbs-specifications/
4. BIM Objects https://quantumprofilesystems.com/quantum-flooring-accessories/bim-objects/

We’re here to support your project every step of the way. #quantumflooring