TF MULTICLOSER INSULATED CAVITY CLOSER
Color: 10 Rusic (Standard Thread)
SPECIFICATIONS
- Fire Rated No
- Check Reveal Available Yes
- Frame Former Profile No
- 1st fix Yes
- 2nd fix Yes
- Minimum Cavity width 100
- Maximum Cavity width 150
- Lengths 2.4M
- Additional Key Features / Economic and versatile on site (easily trimmed) / One profile suits 5 cavity widths - insulation trimmed on site / Complies with new Part L Building Regulations / Accepts all window and door frame material / XPS Insulation is zero rated for ozone depletion potential (ODP) /
TF-Multicloser is a versatile insulated cavity closer that is easy to use to achieve building regulations where cavity widths are 100mm-150mm.
TF-Multicloser has pre cut grooves to simplify cutting the closer to the required cavity width. The closer will suit 100mm, 110mm, 125mm and 150mm cavity widths. Simply cut along the groove of the appropriate cavity width with a sharp knife. Cut the profile to the respective height and widths of the cavity opening and then push fit into the cavity alternatively build into the cavity using Dacatie’s DTU fixing ties.
When you are using the closer in a second fix application the vertical section should be a minimum of 50mm greater in height than the opening. The ribbed surface of TF-Multicloser will accept wet plaster, or plasterboard on dabs.
Best practice would suggest priming the closer surface prior to finishing.
TF-Multicloser is available in 2.4 metre lengths and suitable for cavities between 100mm and 150mm.
